强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

Analysis of dynamical behaviors of a 2-DOF friction oscillator with elastic impacts and negative feedbacks

Nonlinear Dynamics - In this paper, the flow switching theory of discontinuous dynamical systems is used as the main tool to study the dynamical behaviors of a two-degree-of-freedom friction...     

基于分子工程的方法设计首例具有Sr2Be2B2O7 (SBBO)结构的深紫外氟碳酸盐双折射晶体AMgLi2(CO3)2F (A=K,Rb)※

分子结构设计是开发新化合物和通过原子尺度操纵优化晶体结构的一种引人注目的策略. 在这个工作中, 利用分子工程的思想, 基于SBBO结构, 成功设计并合成两个新型氟碳酸盐KMgLi₂(CO₃)₂F和RbMgLi₂(CO₃)₂F. 在两个结构中, a-b平面是由CO₃和LiO₃F阴离子基团组成的无限[Li₃C₃O₆F₃]_∞层, 进一步相邻的层通过F原子连接形成一个独特的[Li₆C₆O₁₂F₃]_∞双层. 这种结构特征对改善晶体的层状生长习性和消除晶体的多晶性有很大的帮助. 光学测试表明, 该系列晶体具有大的双折射和短的紫外截止边, 是深紫外双折射晶体良好的候选材料.     

Auto-deposition of 210Bi and 210Po on nickel discs and their application in the analysis of natural waters

Journal of Radioanalytical and Nuclear Chemistry - This study presents a time-efficient method of analysing 210Pb, 210Bi, and 210Po in natural waters. The optimum pH (1.00), temperature...     

Development,validation and application of a UHPLC–MS/MS method for quantification of the adiponectin-derived active peptide ADP355 in rat plasma

A UHPLC–MS/MS method for the quantification of ADP355, an adiponectin-derived active peptide, was developed and validated. The extraction method employed simple protein precipitation using methanol and chromatographic separation was achieved on anAccucore™ RP-MS C₁₈ column (100 × 2.1 mm, 2.6 μm, 80 Å), using 0.1% formic acid in both water and acetonitrile with gradient elution at the flow rate of 400 μl/min within 4.0 min. Detections were performed under positive ion mode with multiple reaction monitoring ion transitions m/z 1109.2 → 309.8 and 871.4 → 310.1 for ADP355 and Jt003 respectively at unit resolution. The linearity range of the calibration curve was 2–1,000 ng/ml with a lower limit detection of 0.5 ng/ml. The selectivity, linearity, precision, accuracy, recovery, matrix effect and stability were validated, and all items met the requirement of US Food and Drug Administration guidance. This method was successfully applied to an intravenous pharmacokinetic study of ADP355 in rats and the in-vitro stability in rat serum, plasma and whole blood was also assessed.     

Metabolites from a New Actinobacteria,Herbidospora yilanensis

Chemistry of Natural Compounds -     

Chamigrane Sesquiterpenes from Cultures of Fungus Antrodiella albocinnamomea

Chemistry of Natural Compounds - A new chamigrane sesquiterpene, antroalbol F (1), along with one known compound, acaciicolinol C (2), were isolated from cultures of the fungus Antrodiella...     

微氧化烧结制备掺杂Y2O3的SiC陶瓷及含镉模拟废水处理

采用了微氧化烧结制备了不同Y₂O₃质量分数（0%、2%、4%、6%）的多孔SiC陶瓷，通过对陶瓷的晶体结构、微观形貌、物理性能和Cd²⁺的去除率测试发现：添加了Y₂O₃的SiC陶瓷出现了较多的第二相Y₂SiO₇、Y₅Si₃C_0.5，随着Y₂O₃的质量分数增加逐渐升高，主相的衍射峰的强度有降低。扫描电子显微镜测试发现，SiC陶瓷的尺寸在2.5 μm，Y₂O₃引入后，SiC陶瓷的晶粒尺寸降低，高温烧结时液相的含量增加，熔体粘度降低，晶粒结合更加紧密，Y₂O₃的引入提高了多孔陶瓷的体积密度，Y₂O₃质量分数为6%SiC的体积密度最大为2.21 g/cm³。热导率随着Y₂O₃质量分数的增加呈现出先升高后降低的趋势。金属Cd²⁺的过滤测试表明：随着Y₂O₃质量分数增加，Cd²⁺的残留质量浓度、膜通量和去除率先降低后升高，当掺杂质量分数为4%时，Cd²⁺残留质量浓度最低为0.042 mg/L，膜通量达到了最大值572 L/（m²·h），去除率最大为99.95%，相比未掺质量分数杂体系的去除率提高了0.14%。随着溶液pH值的逐渐增大，金属Cd²⁺的残留质量浓度逐渐降低、去除率逐渐升高，pH≥9时最终均趋于稳定。综合来看，多孔SiC陶瓷的助烧剂Y₂O₃最佳掺量为4%。     

Synthesis and Applications of SAPO-34 Molecular Sieves

Silicoaluminophosphate zeolite (SAPO-34) has been attracting increasing attention due to its excellent form selection and controllability in the chemical industry, as well as being one of the best industrial catalysts for methanol-to-olefin (MTO) reaction conversion. However, as a microporous molecular sieve, SAPO-34 easily generates carbon deposition and rapidly becomes inactivated. Therefore, it is necessary to reduce the crystal size of the zeolite or to introduce secondary macropores into the zeolite crystal to form a hierarchical structure in order to improve the catalytic effect. In this review, the synthesis methods of conventional SAPO-34 molecular sieves, hierarchical SAPO-34 molecular sieves and nanosized SAPO-34 molecular sieves are introduced, and the properties of the synthesized SAPO-34 molecular sieves are described, including the phase, morphology, pore structure, acid source, and catalytic performance, in particular with respect to the synthesis of hierarchical SAPO-34 molecular sieves. We hope that the review can provide guidance to the preparation of the SAPO-34 catalysts, and stimulate the future development of high-performance hierarchical SAPO-34 catalysts to meet the growing demands of the material and chemical industries.     

低温固相反应法制备钠快离子导体NaZr2(PO4)3粉体

为了进一步促进钠快离子导体磷酸锆钠(NaZr2(PO4)3)粉体的实际应用,本文提出了一种以氧氯化锆(ZrOCl2·8H2O)和二水磷酸二氢钠(NaH2PO4·2H2O)为原料的低温固相反应法制备NaZr2(PO4)3粉体.通过XRD,SEM和Raman等测试手段系统研究了磷酸盐用量对制备磷酸锆钠粉体的影响.结果 表明:采用超量的磷酸盐有利于纯相磷酸锆钠粉体的合成.同时当锆盐与磷酸盐的摩尔比为2∶5.4时,能够合成平均粒径1μm,尺寸均匀,分散性良好的磷酸锆钠粉体.研究发现研磨时发生的固相反应对磷酸锆钠粉体的制备有重要作用,一方面促进了无定型磷酸锆钠的产生,有利于磷酸锆钠晶体形成;另一方面原位生成的氯化钠为晶体的生长提供了良好的液相环境,促进了磷酸锆钠粉体的低温合成.该工作为磷酸锆钠粉体的大规模生产提供了一条简单有效的方法.